![\"HVAC](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/VRF-VRV-variable-refrigerant-flow-hvac.png\")
<\/p>\n<\/p>\n
Before you design, learn what universities, building owners, energy managers, consultant and installers have learned through their experience with VRF systems.<\/p>\n
With this guide you will learn more about Variable refrigerant flow (VRF), also known as variable refrigerant volume (VRV), an HVAC technology that like ductless minisplits uses refrigerant as the cooling and heating medium. This refrigerant is conditioned by a single outdoor condensing unit, and is circulated within the building to multiple indoor units.<\/p>\n
VRF systems generally include one or more air-source outdoor compressor units serving multiple indoor fan coil refrigerant evaporator units. This type of system is distinguished from small split systems that usually serve a maximum of five indoor units without variable refrigerant flow.<\/p>\n
VRFs Outdoor Units typically are equipped with a DC inverter compressor to support variable motor speed and therefore variable refrigerant flow rather than simply turning on \/ off operations. In this configuration VRF units operate only at the necessary speed, allowing considerable energy savings in partial load conditions. VRF heat recovery technology allows individual indoor units to operate in heating or cooling mode independently as needed, while the compressor load benefits from internal heat recovery.<\/p>\n
Primary manufacturers:<\/p>\n
After contributing to the transformation of the environmental air conditioning, VRF systems (Variable Refrigerant Flow systems) are now able to guarantee efficient and competitive solutions for the majority HVAC applications.<\/p>\n
VRF use a fluid called refrigerant as the cooling and heating medium instead of water. This refrigerant is conditioned by a single outdoor condensing unit and is circulated through the system within the building via a compressor to multiple indoor units.<\/p>\n
These systems are\u00a0easy to install<\/strong>\u00a0and allow to preserve the structure of the existing building. The\u00a0modular design<\/strong>\u00a0makes them a great option for projects that will be built in stages, for example, one hotel floor at a time without interrupting the whole business activity.<\/p>\n It is the task of the external condensing unit to dispose of or integrate the power necessary for the operation of the cycle, exchanging heat with the external environment. The most basic version of a VRF system uses an outside condenser unit that can be used for either heating or cooling. There are two refrigerant lines, one for supply and one for return, and they are shared by various indoor fan-coils.<\/p>\n It is possible to identify two main reasons that explain why the direct expansion solution is more efficient than the hydronic solution:<\/p>\n Depending on the operating mode, the outdoor unit and indoor units may behave as a condenser or evaporator. With refrigerant flowing directly into indoor units, is it possible to achieve higher nominal and seasonal coefficients of performance (COP, EER, SCOP, SEER) than air to water heat pumps.<\/strong>\u00a0Usually performances are certified by third party testing based on well-defined procedures that ensures a healthy and solid competition on a market open to all manufacturers. AHRI and Eurovent are two independent companies famous for their strict test measures and high standards.<\/p>\n The VRF systems are able to operate in heating mode, in cooling mode and with the possibility of being configured for heat recovery. Heat Recovery systems have the ability to simultaneously heat certain zones while cooling others. In this case the heat extracted from zones requiring cooling is put to use in the zones requiring heating. This is made possible because the heating unit is functioning as a condenser, providing sub-cooled liquid back into the line that is being used for cooling. While the heat recovery system has a greater initial cost, it allows for better zoned thermal control of a building and overall greater efficiencies.<\/p>\n VRF systems have a significant impact on energy consumption.<\/p>\n Main VRF advantages:<\/p>\n Thanks to its advanced technology, ultra-precise control and the absence of intermediate water fluid it is possible to achieve higher nominal and seasonal coefficients of performance (COP, EER, SCOP, SEER) than air to water heat pumps.<\/p>\n The VRF systems are able to operate in\u00a0heating mode<\/strong>, in\u00a0cooling mode<\/strong>\u00a0and with the possibility of being configured for\u00a0heat recovery<\/strong>. Heat Recovery systems have the ability to simultaneously heat certain zones while cooling others. In this case the heat extracted from zones requiring cooling is put to use in the zones requiring heating. This is made possible because the heating indoor unit is functioning as a condenser, providing sub-cooled liquid back into the line that is being used for cooling.<\/p>\n This is usually done through a three pipes design (hot gas fot reating, liquid for cooling and and return) and one or more distributors (branch selectors) with valves that switch the supply depending on the operating mode required by the indoor unit. While a\u00a0two-pipe<\/strong>\u00a0system allows a reduction of pipe transmission losses and installation costs, a\u00a0three-pipe<\/strong>\u00a0system generally provides a higher heat recovery efficiency than a two-pipe system.<\/p>\n While the heat recovery system has a greater initial cost, it allows for better zoned thermal control of a building and overall greater efficiencies. A state-of-the-art HVAC technology, Variable Refrigerant Flow zoning systems are highly beneficial in all areas of commercial construction because they provide precise zoned control that can contribute points toward\u00a0LEED\u00ae certifications<\/strong>.<\/p>\n Developed by the U.S. Green Building Council (USGBC), LEED provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions.<\/p>\n Thanks to VRF high performances and cutting-edge technology it is possible to achieve a great number of points in\u00a0LEED Energy and Atmosphere Credit<\/strong>.<\/p>\n Thanks to VRF high performances and cutting-edge technology it is possible to achieve a great number of points in\u00a0LEED Energy and Atmosphere Credit<\/strong>.<\/p>\n PREREQUISITES:<\/p>\n For further information on energy efficiency read the full documents:<\/p>\n VRF systems distribute refrigerant throughout the building offering flexible installation.<\/p>\n VRF systems use refrigerant R-410A. The safety classification of\u00a0R-410A<\/strong>\u00a0in ASHRAE Standard 34 is group A1:\u00a0nontoxic<\/strong>\u00a0and\u00a0nonflammable<\/strong>\u00a0refrigerant with zero ozone-depletion potential. Safe, clean and environment friendly. it meets the stringent mandates of both the Montreal Protocol and the U.S. Environmental Protection Agency.<\/p>\n Even if R-410a belongs to A1 group, the American and European regulations says that VRV Systems have to be properly selected and designed adhering to ASHRAE Safety Standard 15, and Standard 34.<\/p>\n However, due to the ability to displace oxygen, VRV Systems have to be properly selected and designed adhering to ASHRAE Safety Standard 15 & 34 (U.S. Territory) and UNI EN 378 (European Territory).<\/p>\n ASHRAE Standard 34 sets the refrigerant concentration limits used in ASHRAE Standard 15 calculations. The refrigerant concentration limit (RCL) is used to determine the allowable pounds of refrigerant per 1,000 cubic feet of occupied space. An occupied space is defined as \u201c\u2026that portion of the premises accessible to or occupied by people, excluding machinery rooms.\u201d The UNI EN 378 – 2017 regulation specifies the requirements related to the safety of people and goods with regard to fixed and mobile refrigeration systems, including heat pumps. The regulation sets the refrigerant concentration limits for category A environments to the maximum practical limit of 0.44 kg\/cubic meter of refrigerant content in environment in case a loss occurs. Manufacturers support the professionals providing free tools the design VRF systems and to estimate amount of refrigerant contained in the overall system. Tools calculate the total amount of refrigerant contained in the designed system and compare it with the volume of the occupied spaces.<\/p>\n In order to comply with the limits imposed, various solutions can be adopted: dividing the system into several smaller systems, shortening the pipes, and increasing the volume of the rooms (for example putting in communications two rooms with transit grids or lifting the doors) are just some of the possibilities available.<\/p>\n If it is not possible to be within the limits, there are still practical alternatives: some VRF manufacturers offer a sensor that detects refrigerant leaks and, when the concentration exceeds a certain concentration, not only stops the operation of the indoor unit, but also activates an audible and visual alarm, giving the occupants the chance to leave the room and ventilate the environment.<\/p>\n Want to learn more about why VRF is the best solution for your building\u2019s needs?<\/p>\n ASK FOR SUPPORT!<\/p>\n","protected":false},"excerpt":{"rendered":" Before you design, learn what universities, building owners, energy managers, consultant and installers have learned through their experience with VRF systems. With this guide you will learn more about Variable refrigerant flow (VRF), also known as variable refrigerant volume (VRV), an HVAC technology that like ductless minisplits uses refrigerant as the cooling and heating medium. This refrigerant is conditioned by a single outdoor condensing unit, and is circulated within the building to multiple indoor units. VRF system introduction VRF systems generally include one or more air-source outdoor compressor units serving multiple indoor fan coil refrigerant evaporator units. This type of <\/p>\n","protected":false},"author":1,"featured_media":229,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_editorskit_title_hidden":false,"_editorskit_reading_time":0,"_editorskit_is_block_options_detached":false,"_editorskit_block_options_position":"{}","_themeisle_gutenberg_block_has_review":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[3],"tags":[32,33,34,30,31],"class_list":["post-228","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-engineering-tools","tag-aria-condizionata","tag-impianti","tag-installazione","tag-vrf","tag-vrv","cat-3-id","has_thumb"],"yoast_head":"\n<\/div>\n![\"\"](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/Direct_expansion_system.jpg\")
<\/p>\n<\/div>\n
\nThe whole system uses one or more inverter compressors to move the refrigerant and adjust the flow of refrigerant accordingly to current load.<\/p>\n<\/div>\n<\/div>\n<\/div>\nIn DX systems the intermediate water fluid is eliminated<\/h3>\n
\n
<\/div>\n\n
<\/div>\n![\"\"](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/Heat-Pump-Refrigerant-Cycle.png\")
<\/h3>\n<\/div>\n
\nIn winter (heating mode) the outdoor unit behave as an evaporator and the indoor units as a condenser. In summer (cooling mode) the outdoor unit behaves as a condenser and the indoor units as an evaporator.<\/p>\n<\/div>\n![\"VRF](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/VRF_heating_cooling_mode.jpg\")
<\/h3>\n<\/div>\n<\/div>\n![\"VRF](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/heat_pump-heat_recovery.jpg\")
<\/h3>\n<\/div>\n<\/div>\nFor further information on energy saving read the full documents<\/h3>\n
\n\n
<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\nWhat impact does the VRF have on energy consumption?<\/h2>\n
\n
\n
\n
\n
\n
\n
\n
<\/div>\n<\/div>\n![\"Energy](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/energy_saving_logic.jpg\")
<\/p>\n<\/div>\n<\/div>\n![\"Heat](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/heat-recovery-VRF.jpg\")
<\/p>\n<\/div>\n
\nOnly few brands are able to do this with a two pipes system using a branch controller. In this case the heat recovery between indoor units is carried out in the BC boxes which houses a liquid\/gas separator, allowing the outdoor unit to deliver a mixture (2 phase) of hot gas for heating and liquid for cooling, all through the same pipe.<\/p>\n<\/div>\n![\"2](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/2vs3-pipes-heat-recovery.jpg\")
<\/p>\n<\/div>\n
\nIf the (COP) coefficient of performance in cooling mode of a system is 4, and the coefficient of performance in heating mode is 4.5, then heat recovery performance can reach more than 8.5.<\/p>\n<\/div>\n![\"Heat](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/COP-VRF-Heat-recovery.jpg\")
<\/p>\n<\/div>\n<\/div>\n![\"VRF](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/VRF_applications-1.jpg\")
<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\nENERGY & ATMOSPHERE (EA)<\/h3>\n
\n<\/div>\n\n
\n
<\/div>\n\n
\n
<\/div>\n\n
<\/div>\n<\/div>\n<\/div>\n\n
<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\nRefrigerant and Safety<\/h2>\n
<\/div>\n<\/div>\n<\/div>\nASHRAE Standard 15 & 34 (U.S. Territory)<\/h3>\n
\n
\nThe RCL for R410a is 25 lbs\/1,000 cubic feet. This amount is reduced by 50% for all areas of institutional occupancies and some 24 hour a day occupancies (13 lbs\/1000 cubic feet).<\/p>\n<\/div>\n<\/div>\n<\/div>\nUNI EN 378 (European Territory)<\/h3>\n
\n
\nCategory A environments: rooms, parts of buildings, building where: people may sleep, people are restricted in their movement, an uncontrolled number of people are present or to which any person has access without being personally acquainted with the necessary safety precautions (ex. hospitals, courts or prisons, theatres, supermarkets, schools, lecture halls, hotels, restaurants\u2026<\/p>\n<\/div>\n![\"EN378](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/EN378_calculation.png\")
<\/p>\n<\/div>\n<\/div>\n<\/div>\n![\"EN378](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/Refrigerant_systems.png\")
<\/p>\n<\/div>\n<\/div>\n<\/div>\n![\"EN378](\"https:\/\/www.studwiz.com\/blog\/wp-content\/uploads\/2022\/05\/refrigerant-leakage-detector-VRF.png\")
<\/p>\n<\/div>\n<\/div>\n<\/div>\nUNI EN 378 (European Territory)<\/h3>\n
\n\n
<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n